Like the G100, the TS100 track system only requires free head room of 100 mm, but is fitted with extension springs rather than torsion springs. These extension springs are positioned in the vertical track. Thanks to the springs being pre-tensioned, the system can be very quickly installed.
G200
The G200 is the standard residential track system requiring free head room of 200 mm. The torsion springs are located directly above the door.
G160
The G160 is a standard track system requiring free head room of 160 mm. The torsion springs are located directly above the door.
G100
Our G100 track system is just what you need when there is not much room for installation. This system requires only 100 mm of free head room. The torsion springs are fitted to the end of the horizontal track.
R60
The R60 is ideally suitable as a practical alternative or replacement for old, uninsulated up-and-over garage doors. We can install the system without any major structural changes being required. The R60 requires only 60 mm of free head room and is only available in a motorised version. The torsion springs are fitted to the end of the horizontal track.