Components > Hardware sets – Residential
ConDoor produces about 20,000 hardware systems for garage doors annually. Always to specification and always of a high quality. Our systems are perfectly suitable for both new construction and renovation products.
“Benefit from our experience, our production line and our production volume.”
ConDoor Door Components offers rail systems with dimensions up to six by three meters and handling capabilities up to three hundred kilos for various panel thicknesses.
We offer as standard five types of garage door hardware systems:
- Torsion springs front: G200/G160
- Torsion springs rear: G100/R60
- Tension springs: TS100
Select our Configurator and configure a hardware set for your garage door yourself.
You can find more information about the systems at Dealer information.
Torsion springs front
G200
The G200 is a universal rail system that requires a top clearance of 200 mm. The torsion springs are located directly above the lintel.
G160
The G160 is a standard rail system that requires a top clearance of 160 mm. The torsion springs are located directly above the lintel.
Torsion springs rear
G100
The G100 is a rail system that requires a top clearance of 100 mm. The torsion springs are located at the end of the horizontal rails.
R60
The R60 is a rail system suitable for renovation projects with a top clearance of just 60 mm. This system must be electrically operated. The torsion springs are located at the end of the horizontal rails.
Tension springs
TS100
The TS100 is the same rail system as the G100, but is fitted with tension springs in the vertical rails. This system is unique, because the springs are preassembled, preinstalled and pre-tensioned.
